(a) A certificate of approval will be accompanied by a photograph of a design
for an approval label or marking, which shall bear the emblem of the Mine
Safety and Health Administration and shall be inscribed substantially as
follows:
Issued to ---------------------------------------------------------------
(Name of Applicant)
(b) A label so inscribed shall be attached to each fluid container in
such a manner that it cannot be easily removed or containers may be so marked
with a metal stencil. The letters and numbers shall be at least 1/2 inch in
height and of a color which contrasts with that of the container.
(c) For a concentrate the label or marking shall clearly indicate
that the certification thereof applies only when the concentrate is used in
exact conformance with the instructions on such label or marking. The label
or marking shall clearly indicate the exact amount of water or other vehicle
to make the fire-resistant hydraulic fluid upon which the certificate of
approval was based.
(d) Appropriate instructions and caution statements on the handling
of the hydraulic fluid or concentrate shall be included on the approval label
or marking.
(e) Use of MSHA's approval label or marking obligates the applicant
to whom the certificate of approval was granted to maintain the
fire-resistant characteristics of the hydraulic fluid and guarantees that it
is manufactured according to the specifications upon which the certificate of
approval was based. Use of the approval label or marking is not authorized
except on containers of hydraulic fluids that conform strictly with the
specifications and characteristics upon which the certificate of approval was
based.
[Sched. 30, 24 FR 10201, Dec. 17, 1959, as amended at 43 FR 12317, Mar. 24,
1978]
