MSHA - Code of Federal Regulations - 30 CFR 57.19025
Skip to content
MSHA - Title 30 CFR
30 CFR § 57.19025
Load end attachments.


(a) Wire rope shall be attached to the load by a method that develops at least 80 percent of the nominal strength of the rope.

(b) Except for terminations where use of other materials is a design feature, zinc (spelter) shall be used for socketing wire ropes. Design feature means either the manufacturer's original design or a design approved by a registered professional engineer

(c) Load end attachment methods using splices are prohibited.


For more information: See MSHA'S Program Policy Manual