Skip to content
MSHA - Title 30 CFR
*****************************************************************
Editorial Note: Based on FedReg. Doc. E8-30639, compliance dates were set for this section. The compliance dates are as follows:
    Each mine operator shall comply with the following sections by the dates listed below.
        1. § 48.27(a) and § § 75.156(a), 75.350(b), and 75.1731 by March 2, 2009.
        2. § 75.333(c)(4) by March 31, 2009.
        3. § § 75.380(d)(7), 75.380(f), 75.381(e)(5), and 75.381(f) by June 30, 2009.
        4. § § 75.350(a)(2), 75.351(e)(2), 75.1103-4(a), 75.1108(a), and 75.1108(b) December 31, 2009.
        5. § 75.1108(c) by December 31, 2018.
        6. Each mine operator required to use an atmospheric monitoring system under Sec. 75.350(b) shall
            comply with the following sections within 60 days after approval of the mine ventilation plan by the
            district manager.

            1. Sec. 75.350(d)(1),
            2. Sec. 75.351(e)(1)(iii),
            3. Sec. 75.351(e)(1)(iv), and
            4. Sec. 75.352(g).
*****************************************************************


30 CFR § 75.156
AMS operator, qualifications.

    (a) To be qualified as an AMS operator, a person shall be provided with task training on duties and responsibilities at each mine where an AMS operator is employed in accordance with the mine operator's approved Part 48 training plan.

    (b) An AMS operator must be able to demonstrate to an authorized representative of the Secretary that he/she is qualified to perform in the assigned position.