|
|
A to Z Index |
Find It! in DOL |
[skip navigational links]
Search MSHA's Website
 |
|
Printer Friendly Version (Contains All Graphics)
Jump to Overview DEPARTMENT OF LABOR MINE SAFETY AND HEALTH ADMINISTRATION Metal and Nonmetal Mine Safety and Health REPORT OF INVESTIGATION Surface Nonmetal Mine (Sand and Gravel) Fatal Powered Haulage Accident September 20, 2007 Conrock North Pit Wilder Construction Company Palmer, Matanuska-Susitna County, Alaska Mine I.D. No. 50-01282 Investigators Stephen A. Cain Supervisory Mine Safety and Health Inspector Melvin K. Palmer Mine Safety and Health Specialist Originating Office Mine Safety and Health Administration Western District 2060 Peabody Road, Suite 610 Vacaville, California 95687 Arthur L. Ellis, District Manager OVERVIEW
Rickey A. Meshew, plant laborer, age 49, was fatally injured on September 20, 2007, when he became entangled in a belt conveyor take-up pulley at the wash plant. Meshew entered the area to shovel spillage. He gained access to the take up pulley through the conveyor frame work. The accident occurred because the procedures to safely remove spillage were not followed. The belt conveyor was not de-energized and blocked against motion prior to persons entering the area. Failure to recognize the hazard of performing work near moving machine parts contributed to the accident. GENERAL INFORMATION
Conrock North Pit, a surface sand and gravel operation, owned and operated by Wilder Construction Company, was located at Palmer, Matanuska-Susitna County, Alaska. The principal operating official was Trevor Edmondson, general manager. The mine normally operated one, 8-10 hour shift per day, 6 days a week. Total employment was 20 persons. Material was mined with a dredge and then crushed, screened, washed, and stockpiled by belt conveyors. The finished products were sold for use as construction aggregate. The last regular inspection of this operation was completed on August 2, 2007. DESCRIPTION OF ACCIDENT
On the day of the accident, Rickey A. Meshew (victim), reported for work at 7:00 a.m., his normal starting time. This was his second day of work at the mine. Derek Barickman, supervisor, held a safety meeting at the beginning of the shift with all of the employees, including Meshew, to discuss lock-out/tag-out procedures. After the meeting, Barickman instructed John Martinez, mechanic, to escort Meshew to the wash plant and show him the areas that needed cleaned up. Later that morning, Barickman met Meshew and pointed out areas around the #13 belt conveyor where material had accumulated that needed to be removed. About 10:00 a.m., Barickman saw Meshew using a skid steer loader to clean the #13 belt conveyor. Meshew had lunch at the crusher area with the other employees at noon. Barickman told him to continue cleaning up around the #13 belt conveyor. Meshew had not removed any of the guards while cleaning the conveyor area. At 12:20 p.m., Barickman shut down the crusher portion of the plant to perform maintenance. The wash plant and associated conveyors continued to operate because the crusher portion operated separately from the wash plant. Barickman and Meshew met at the crusher area and then Meshew returned to the wash plant. Barickman performed maintenance on the crusher until approximately 4:00 p.m. when he began start-up procedures for the crusher. Barickman didn't see Meshew, so he went to the wash plant and discovered the victim lying on the ground under the take up-pulley of the #13 belt conveyor. Meshew was found inside of the frame work of the conveyor support structure along with the shovel he had been using to clean the area. Barickman immediately called Jack Kerslake, pit superintendent, who then called for emergency medical assistance. Meshew was pronounced dead by the Susitna County deputy sheriff. The cause of death was attributed to blunt force trauma. INVESTIGATION OF THE ACCIDENT
The Mine Safety and Health Administration (MSHA) was notified of the accident at 4:27 p.m. on September 20, 2007, by a telephone call from Chuck Wilkes, environmental and safety technician, to Diane Watson, acting assistant district manager. An investigation began on the same day. An order was issued pursuant to section 103(k) of the Mine Act to ensure the safety of the miners. MSHA's accident investigation team traveled to the mine, conducted a physical inspection of the accident site, interviewed employees, and reviewed conditions and work procedures relevant to the accident. MSHA conducted the investigation with the assistance of mine management and employees. DISCUSSION
Location of the Accident The accident occurred at the take-up pulley of the #13 belt conveyor located at the wash plant area of the mine. Belt conveyor The belt conveyor involved in the accident was 107 feet long, 48 inches wide, and traveled about 442 feet per minute. The take-up pulley on the conveyor belt was 12 inches in diameter, 51 inches long, and positioned 65 inches above ground level. Expanded metal guards were positioned on each side of the conveyor belt to prevent contact with the take-up pulley. The electrical control system was inspected, tested, and found to be functioning properly. Weather Conditions On the day of the accident, the weather was sunny with a temperature of approximately 45 degrees Fahrenheit. Weather was not considered to be a factor in the accident. Training and Experience Rickey A. Meshew had 32 years mining experience and had worked at this mine for 2 days. He had received training in accordance with 30 CFR, Part 46. ROOT CAUSE ANALYSIS
A root cause analysis was conducted and the following causal factor was identified: Causal Factor: The procedures and controls to remove spillage around belt conveyors were not followed. The belt conveyor was not de-energized and blocked against hazardous motion before persons removed spillage. Corrective Action: Persons removing spillage around belt conveyors should be trained to de-energize and block conveyor belts against hazardous motion before any work is performed. Persons should be thoroughly trained to recognize identifiable hazards before any work begins and ensure steps are taken to safely perform the task. CONCLUSION
The accident occurred because the procedures to safely remove spillage were not followed. The belt conveyor was not de-energized and blocked against motion prior to persons entering the area. Failure to recognize the hazard of performing work near moving machine parts contributed to the accident. ENFORCEMENT ACTIONS
Order No. 6308228 was issued on September 20, 2007, under Section 103(k) of the Mine Act:
Citation No. 6398237 was issued on November 20, 2007, under the provisions of Section 104(a) of the Mine Act for a violation of 30 CFR 56.14105:
Related Fatal Alert Bulletin: APPENDIX A
Persons Participating in the Investigation Wilder Construction Company
Chuck Wilkes ............... environmental and safety technician Ian Langtry ............... division safety manager
Melvin K. Palmer ............... mine safety and health specialist |
 Back to Top |
www.msha.gov | www.dol.gov |
|
| ||
|---|---|---|
|
| ||
|
Mine Safety and Health Administration (MSHA) 1100 Wilson Boulevard, 21st Floor Arlington, VA 22209-3939 |
Phone:
(202) 693-9400 Fax-on-demand: (202) 693-9401 Technical (web) questions: Webmaster On-line Filing Help: MSHAhelpdesk@dol.gov or call (877) 778-6055 Contact Us | |
