COAL MINE FATALITY - On Thursday, June 6, 2013, a 36-year-old conveyor belt foreman with 4 years of mining experience was killed while checking a belt wiper at the belt conveyor discharge. He was positioned at the end of an elevated catwalk parallel to the belt drive to check the wiper. When the victim contacted the guardrail at the end of the catwalk, it gave way and he fell below onto the moving belt conveyor.
Check guards along belt conveyors for stability and good repair.
Train all employees thoroughly on the dangers of working or traveling around moving conveyor belts.
Install appropriately-designed railings, barriers, or covers at all required conveyor belt locations, and ensure it is maintained in structurally sound condition.
Perform thorough workplace examinations. Inspect the work areas for all potential hazards including places that persons may fall from or through.
Provide belt conveyor stop and start controls at areas where miners must access both sides of the conveyor. Provide these areas with adequate crossing facilities (e.g. cross-overs or cross-unders).
Do not assume handrails or guards are strong enough to support you, and never lean against or support your weight on guarding.
||Submit your own suggestion for a remedy to prevent this type of accident in the future.
Please specify if you wish your submission to be anonymous or whether your name may be used. Please include the year of the fatality and the fatality number.
This is the ninth fatality reported in calendar year 2013 in the coal mining industry. As of this date in 2012, there were nine fatalities reported in the coal mining industry. This is the third fatality classified as Powered Haulage in 2013. At this time in 2012, there were no fatalities in this classification.
The information provided in this notice is based on preliminary data ONLY and does not represent final determinations regarding the nature of the incident or conclusions regarding the cause of the fatality.
For more information:
MSHA's Fatal Accident Investigation Report