MSHA News Release: [08/06/2012]
Contact: Amy Louviere
Phone: (202) 693-9423
Release Number 12-1597-NAT
MSHA's 'examinations' rule for underground coal mines effective Aug. 6
Regulation requires mine operators to identify and correct hazardous conditions
ARLINGTON, Va. — The U.S. Department of Labor's Mine Safety and Health Administration's final rule "Examinations of Work Areas in Underground Coal Mines for Violations of Mandatory Health or Safety Standards," which was published April 6, 2012, in the Federal Register, becomes effective today. The rule requires mine operators to identify and correct hazardous conditions and violations of nine health and safety standards that pose the greatest risk to miners, including the kinds of conditions that led to the deadly explosion at the Upper Big Branch Mine in April 2010.
"Effective pre-shift, supplemental, on-shift and weekly examinations are the first line of defense to protect miners working in underground coal mines," said Joseph A. Main, assistant secretary of labor for mine safety and health.
After analyzing its accident reports and enforcement data for underground coal mines covering a five-year period, MSHA determined that the same types of violations of health or safety standards are found by MSHA inspectors in underground coal mines every year, and that these violations present some of the most unsafe conditions for coal miners.
"These repeated violations expose miners to unnecessary safety and health risks that should be found and corrected by mine operators. The final rule, effective today, will increase the identification and correction of unsafe conditions in mines earlier, removing many of the conditions that could lead to danger, and improve protection for miners in underground coal mines," said Main.
The rule requires that, during pre-shift, supplemental, on-shift and weekly examinations, underground coal mine operators, in addition to examining for hazardous conditions as in the existing regulations, examine for violations of the nine specific health and safety standards. The rule also requires operators to record the actions taken to correct hazardous conditions, as in the existing regulations, and violations of the nine standards. Additionally, operators must review with mine examiners, on a quarterly basis, citations and orders issued in areas where pre-shift, supplemental, on-shift and weekly examinations are required.
The nine standards address ventilation, methane, roof control, combustible materials, rock dust, equipment guarding and other safeguards. They are consistent with the standards emphasized in MSHA's Rules to Live By initiative and the types of violations cited in MSHA's accident investigation report on the Upper Big Branch Mine explosion as contributing to the cause of that deadly accident. MSHA launched Rules to Live By, an outreach and enforcement program designed to strengthen efforts to prevent mining fatalities, in February 2010.
In 2011, MSHA issued approximately 158,000 violations, of which approximately 77,000 were attributable to underground coal mines, even though these mines represent just 4 percent of all mines.