skip navigational linksDepartment of Labor Seal U.S. Department of Labor
Mine Safety and Health Administration
Protecting Miners' Safety and Health Since 1978
Photos representing the mining workforce
 www.msha.gov
Find It! in DOL | Compliance Assistance |    
[Federal Register: May 9, 2001 (Volume 66, Number 90)]
[Notices]
[Page 23743-23744]

-----------------------------------------------------------------------

DEPARTMENT OF LABOR
Mine Safety and Health Administration

Proposed Information Collection Request Submitted for Public Comment and Recommendations; Slope and Shaft Sinking Plans

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Department of Labor, as part of its continuing effort to reduce paperwork and respondent burden conducts a preclearance consultation program to provide the general public and Federal agencies with an opportunity to comment on proposed and/or continuing collections of information in accordance with the Paperwork Reduction Act of 1995 (PRA95) (44 U.S.C. 3506(c)(2)(A)). This program helps to ensure that requested data can be provided in the desired format, reporting burden (time and financial resources) is minimized, collection instruments are clearly understood, and the impact of collection requirements on respondents can be properly assessed.

DATES: Submit comments on or before July 9, 2001.

ADDRESSES: Send comments to Brenda C. Teaster, Acting Chief, Records Management Division, 4015 Wilson Boulevard, Room 709A, Arlington, VA 22203-1984. Commenters are encouraged to send their comments on a computer disk, or via Internet E-mail to bteaster, along with an original printed copy. Ms. Teaster can be reached at (703) 235-1470 (voice), or (703) 235-1563 (facsmile).

FOR FURTHER INFORMATION CONTACT: Brenda C. Teaster, Acting Chief, Records Management Division, U.S. Department of Labor, Mine Safety and Health Administration, Room 709A, 4015 Wilson Boulevard, Arlington, VA 22203-1984. Ms. Teaster can be reached at bteaster (Internet E-mail), (703) 235-1470 (voice), or (703) 235-1563 (facsimile).

SUPPLEMENTARY INFORMATION:

I. Background

   The standard 30 CFR section 77.1900 was enacted in 1971 and was amended in 1982 and again in 1995. The standard requires underground coal mine operators to develop a prudent engineered design plan to develop a slope or shaft whenever an operator decides to open such a coal mine. The plan is required by the standard and is to be reviewed and approved by MSHA before the actual hazardous work begins.

II. Desired Focus of Comments

   Currently, the Mine Safety and Health Administration (MSHA) is soliciting comments concerning the proposed extension of the information collection related to Slope and Shaft Sinking Plans. MSHA is particularly interested in comments which: A copy of the proposed information collection request may be viewed on the Internet by accessing the MSHA Home Page (http://www.msha.gov) and selecting "Statutory and Regulatory Information" then "Paperwork Reduction Act submission (http://www.msha.gov/regspwork.htm)", or by contacting the employee listed above in the
FOR FURTHER INFORMATION CONTACT section of this notice for a hard copy.

III. Current Actions

   The average 25 slope or shaft development plans that MSHA receives on an annual basis, are reviewed to ensure that the required work is performed in a safe manner, and it protects those miners performing the work. Prudent engineering design does evolve along with improved machinery to perform the work, but there has not been any revision to the requirements for such a plan.    Dated: May 1, 2001.
Brenda C. Teaster,
Acting Chief, Records Management Division.
[FR Doc. 01-11636 Filed 5-8-01; 8:45 am]
BILLING CODE 4510-43-M


Back to Top   Back to Top www.msha.gov www.dol.gov


Mine Safety and Health Administration (MSHA)
1100 Wilson Boulevard, 21st Floor
Arlington, VA 22209-3939
Phone:    (202) 693-9400
Fax-on-demand: (202) 693-9401
Technical (web) questions: Webmaster
On-line Filing Help: MSHAhelpdesk@dol.gov
or call (877) 778-6055

Contact Us