[Federal Register: May 13, 2010 (Volume 75, Number 92)]
[Notices]
[Page 27004]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Mine Safety and Health Administration
Petitions for Modification
This notice amends the petition for modification submitted by Lone
Mountain Processing, Inc., on July 15, 2009, (Docket Number M-2009-024-
C). The amendment assigns a separate docket number for each of the
mines listed. Lone Mountain Processing, Inc., filed a petition for
modification of existing standard 30 CFR 75.503 (Permissible electric
face equipment; maintenance) and 30 CFR 18.35 (Portable trailing cables
and cords) for the Clover Fork No. 1 Mine, (MSHA I.D. No. 15-18647),
Huff Creek No. 1 Mine (MSHA I.D. No. 15-17234), and Darby Fork No. 1
Mine, MSHA I.D. No. 15-02263). MSHA published the notice in the Federal
Register on December 21, 2009 (74 FR 67915). Initially, this petition
for modification was assigned one docket number. After investigating
these mines it has been determined that the conditions at the mines are
different and a separate decision and order will be issued for each
mine. This requires having separate docket numbers for each mine. A
docket number is assigned for each of the mines as follows: (a) The
Lone Mountain Processing, Inc., Clover Fork No. 1 Mine, (MSHA I.D. No.
15-18647), Docket No. M-2009-024-C; (b) Huff Creek No. 1 Mine (MSHA
I.D. No. 15-17234), Docket No. M-2010-021-C; and (c) Darby Fork No. 1
Mine, (MSHA I.D. No. 15-02263), Docket No. M-2010-022-C. These mines
are located in Harlan County, Kentucky.
Patricia W. Silvey,
Director, Office of Standards, Regulations and Variances.
[FR Doc. 2010-11448 Filed 5-12-10; 8:45 am]
BILLING CODE P
