|[December 22, 2003 (Volume 68, Number 245)]|
Department of Labor (DOL)
(Proposed Rule Stage)
Mine Safety and Health Administration (MSHA)
87. ASBESTOS EXPOSURE LIMIT
Priority: Other Significant
Legal Authority: 30 USC 811; 30 USC 813
CFR Citation: 30 CFR 56; 30 CFR 57; 30 CFR 71
Legal Deadline: None
Abstract: MSHA's permissible exposure limit (PEL) for asbestos applies to surface (30 CFR part 56) and underground (30 CFR part 57) metal and nonmetal mines and to surface coal mines and surface areas of underground coal mines (30 CFR part 71) and is over 20 years old. MSHA is considering rulemaking to lower the PEL in order to reduce the risk of miners developing asbestos-induced occupational disease. A recent report by the Office of the Inspector General (OIG) recommended that MSHA lower its existing permissible exposure limit for asbestos to a more protective level, and address take-home contamination from asbestos. It also recommended that MSHA use Transmission Electron Microscopy to analyze fiber samples that may contain asbestos.
Statement of Need: Current scientific data indicate that the existing asbestos PEL is not protective of miners' health. MSHA's asbestos regulations date to 1967 and are based on the Bureau of Mines (MSHA's predecessor) standard of 5 mppcf (million particles per cubic foot of air). In 1969, the Bureau proposed a 2 mppcf and 12 fibers/ml standard. This standard was promulgated in 1969. In 1970, the Bureau proposed to lower the standard to 5 fibers/ml, which was promulgated in 1974. MSHA issued its current standard of 2 fibers/ml in 1976 for coal mining (41 FR 10223) and 1978 for metal and nonmetal mining (43 FR 54064). During inspections, MSHA routinely takes samples, which are analyzed for compliance with its standard.
Other Federal agencies have addressed this issue by lowering their PEL for asbestos. For example, the Occupational Safety and Health Administration, working in conjunction with the Environmental Protection Agency, enacted a revised asbestos standard in 1994 that lowered the permissible exposure limit to an 8-hour time-weighted average limit of 0.1 fiber per cubic centimeter of air and the excursion limit to 1.0 fiber per cubic centimeter of air (1 f/cc) as averaged over a sampling period of thirty (30) minutes. These lowered limits reflected increased asbestos-related disease risk to asbestos- exposed workers.
Summary of Legal Basis: Promulgation of this regulation is authorized by section 101 of the Federal Mine Safety and Health Act of 1977.
Alternatives: The Agency has increased sampling efforts in an attempt to determine current miners' exposure levels to asbestos, including taking samples at all existing vermiculite, taconite, talc, and other mines to determine whether asbestos is present and at what levels. In early 2000, MSHA began an intensive sampling effort at operations with potential asbestos exposure. These efforts continue. While sampling, MSHA staff discussed with miners and mine operators the potential hazards of asbestos and the types of preventive measures that could be implemented to reduce exposures. The course of action MSHA takes in addressing asbestos hazards to miners will, in part, be based on these sampling results.
Anticipated Cost and Benefits: MSHA will develop a preliminary regulatory economic analysis to accompany any proposed rule that may be developed.
Risks: There is concern that miners could be exposed to the hazards of asbestos during mine operations where the ore body contains asbestos. There is also potential for exposure at facilities in which installed asbestos-containing material is present. Overexposure to asbestos causes asbestosis, mesothelioma, and other forms of cancers.
_______________________________________________________________________ Action DFR Cite _______________________________________________________________________ ANPRM 67 FR 15134 03/29/02 Notice of Public Meetings 03/29/02 Notice of Change67 FR 19140Meetings 04/18/02 ANPRM Comment Period End 06/27/02 NPRM 05/00/04
Regulatory Flexibility Analysis Required: Undetermined
Small Entities Affected: Businesses
Government Levels Affected: None
Additional Information: The Office of the Inspector General's ``Evaluation of MSHA's Handling of Inspections at the W.R. Grace & Company Mine in Libby, Montana,'' was issued in March 2001.
Agency Contact: Marvin W. Nichols Jr.
Director, Office of Standards
Department of Labor
Mine Safety and Health Administration
1100 Wilson Boulevard
Arlington, VA 22209
Phone: 202 693-9440
Fax: 202 693-9441
Phone: (202) 693-9400
Fax-on-demand: (202) 693-9401