Skip to content
LIST OF APPROVED PRODUCTS
2005-09-A&CC


The following products were approved or certified during June 2005, and have been added to the Mine Safety and Health Administration's list of permissible equipment.

The following products were approved as having met Part 7, Title 30 CFR.

1. Model BF6M 1013FC (MVS) Diesel Engines. Approval No. 07-ENA050002-0, issued to Deutz Corporation, 3883 Steve Reynolds Blvd., Norcross, Georgia 30093, June 2, 2005.


2. Model 3044C-T Diesel Engines. Approval No. 07-ENA050003-0, issued to Mitsubishi Engine North America, Inc., 1250 Greenbriar Drive, Suite, E, Addison, Illinois 60101, June 2, 2005.

3. Model I2PM, Direct Current Motors. Approval No. 07-JA050004-0, issued to WaveCrest Laboratories, LLC, 45600 Terminal Drive, Dulles, Virginia 20166, June 23, 2005.

4. "Super-Trex Reduced Diameter P & R " Cable. Approval No. 07-KA050012-0, issued to TPC Wire & Cable, 7061 East Pleasant Valley Road, Independence, Ohio 44131, June 22, 2005.

5. Lapp VFD Slim Cable. Approval No. 07-KA050013-0, issued to Lapp USA, 29 Hanover Road, Florham Park, New Jersey 07932, June 22, 2005.

6. A306332 Mining Power Cable. Approval No. 07-KA050014-0, issued to The Rochester Corporation, 751 Old Brandy Road, Culpepper, Virginia 22701, June 22, 2005.

7. Leaky Feeder Cable. Approval No. 07-KA050017, issued to Hitachi Cable Manchester, Inc., 900 Holt Avenue-East Industrial Park, Manchester, New Hampshire 03109, June 30, 2005.

The following product was approved as having met Part 18, Title 30 CFR.

1. Model 330091 Display Box. Approval No. 18-XPA050012-0, issued to DBT America, Inc., 2045 West Pike Street, Houston, Pennsylvania 15342, June 17, 2005.

The following products were accepted as having met the Flame Resistant Solid Products Taken Into Mines.

1. Type E 3120 Hydraulic Hose Cover Material. Acceptance No. IC-8/13, issued to Semperit, Triester Bundesstrasse 26, A-2632 Wimpassing, Austria, June 22, 2005.

2. Type N 3170 Hydraulic Hose Cover Material. Acceptance No. IC-8/14, issued to Semperit, Triester Bundesstrasse 26, A-2632 Wimpassing, Austria, June 22, 2005.

3. Type CS-026RX Hydraulic Hose Cover Material. Acceptance No. IC-8/15, issued to Semperit, Triester Bundesstrasse 26, A-2632 Wimpassing, Austria, June 22, 2005.

Sincerely,

Steven J. Luzik

Chief, Approval and Certification Center